– 3
–
The water shortage safeguard prevents the burner
to be turned on when there is water shortage.
–
A sieve prevents the contamination of the safe-
guard and must be cleaned regular.
–
The temperature stop switches off the machine
when the waste gases have reached very high tem-
peratures.
몇
WARNING
Risk of injury! Appliance, accessories, supply lines and
connections must be in fault-free condition. If they are
not in a perfect state then the appliance must not be
used.
Lock parking brake.
Figure 3
Screw tightening torque: 6.5-7.0 Nm
Figure 4
Hook the tool bag onto the top tabs on the appli-
ance.
Tilt the tool bag down and lock it into place.
Fasten the tool bag with 2 screws (torque: 6.5 -
7.0 Nm).
Note:
2 screws are left over.
Note:
The EASY!Lock system joins components with a
quick-fasten thread solidly and securely with just one turn.
Figure 5
Join the spray lance with the trigger gun and tighten
until hand-tight (EASY!Lock).
Insert the high pressure nozzle onto the spray
lance.
Install union nut and hand-tighten it (EASY!Lock).
Join the high-pressure hose with trigger gun and
high-pressure connection of the appliance and
tighten until hand-tight (EASY!Lock).
Determining the hardness of tap water:
–
through the public water supply works,
–
using a hardness tester (order no. 6.768-004)
Note:
–
RM 110 prevents calcification of the heating coil in
the presence of hard water.
–
RM 111 prevents the formation of black water and
cares for the pump in the presence of soft water.
Note:
A test container of RM 110 system care is includ-
ed in the scope of delivery.
Refill system care.
DANGER
Danger of explosion! Only refill diesel oil or light fuel oil.
Inappropriate fuels, e.g. petrol, must not be used.
ATTENTION
Risk of damage! Never operate device with an empty
fuel tank. The fuel pump will otherwise be destroyed.
Refill fuel.
Close tank lock.
Wipe off spilled fuel.
DANGER
Risk of injury!
–
Use Kärcher products only.
–
Under no circumstances fill solvents (petrol, ace-
ton, diluting agent etc.)
–
Avoid eye and skin contact.
–
Observe safety and handling instructions by the de-
tergent manufacturer.
Kärcher offers an individual cleaning and care ap-
pliances program.
Your dealer will consult you gladly.
Refill detergent.
For connection values refer to technical specifications.
Connect the supply hose (minimum length 7.5 m,
minimum diameter 3/4“) to the water connection of
the unit and to the water inlet (e.g. tap) using the
water connection adapter.
Note:
The supply hose is not included in the scope of
delivery.
If you want to suck in water from an external vessel, the
following modification is necessary:
Figure 6
Remove the two screws on the burner casing.
Figure 7
Unscrew the back wall and remove it.
Figure 8
Remove water connection from the fine filter.
Unscrew the fine filter from the pump head.
Remove the system care reservoir.
Figure 9
Unscrew the top supply hose to the swimmer con-
tainer.
Connect the top supply hose at pump head.
Replug the rinse line of the detergent dosing valve
to blind plugs.
Connect suction hose (minimum diameter 3/4“)
with filter (accessory) to the water connection point.
–
Max. suck height: 0.5 m
Until the pump sucked in water, you should:
Set the pressure/quantity regulation at the pump
unit to maximum quantity.
Close the dosing valve for the detergent.
DANGER
Risk of personal injury or damage! Never suck in water
from a drinking water container. Never suck in liquids
which contain solvents like lacquer thinner, petrol, oil or
unfiltered water. The sealings within the device are not
solvent resistant. The spray mist of solvents is highly in-
flammable, explosive and poisonous.
Assembly in reverse order.
Water shortage safeguard
Temperature stop for exhaust gases
Start up
Installing the handle
Install the tool bag
Install the hand-spray gun, the jet pipe, the
nozzle and the high pressure hose
System care
Define system care
Water hardness
(°dH)
System care products to be used
<3
RM 111
>3
RM 110
Refill system care
Refill fuel
Refill detergent
Water connection
Suck in water from vessel
18
EN
Содержание 1.174 Series
