KARCHER Surface Cleaner 9.802-898.0
21
PRESSURE W
ASHER
OPERA
TOR’S MANUAL
EXTENDED SWIVEL ASSEMBLY EXPLODED VIEW & PART LIST
COMPONENT IDENTIFICATION AND INSTRUCTIONS
A. Clip
B. H. P. Hose
C. Hose guide
(except models "No Guide")
D. Pass hole
E. Swivel
F. Bushing reductor
G. Tension knob
H. Pump hose
I. Lock pin for reel
J. Fixed base
K. Handle
L. Reel
3
2
3
2
1
4
6
1
5
4
3
5
2
3
2
3
2
3
2
F
D
H
F
E
C
B
G
I
A
J
K
L
INSTALLATION INSTRUCTION
Hose installed in factory, to replace hoses follow procedures
given under "Connecting hoses
"
CONNECTING HOSES
WARNING:
Before operation make sure that pressure system
does not exceed maximum working pressure rating of reel.
NOTE:
Pipe thread sealant is required to be applied on all
threads.
1.
Route H. P. Hose (B) through hose guide (C) and pass
hole (D).
2.
Open Clip (A) and pass the H. P. Hose (B) through it.
3.
Before to coil the hose make sure to relierf pressure in gun
and turn off engine.
4
. Connect H. P. Hose (B) to Swivel (E) tighten securely.
5
. Tighten Clip (M) to Reel (L).
6.
Extend hose and wind onto reel (L) turning the handle (K)
with the lock pin (I) unlocked, lock reel (L) when not used.
ADJUSTMENTS REEL TENSION
Adjust reel tension by tightening or loosening plastic knob (G).
SERVICE INSTRUCTIONS
For hose reel maintenance and to prevent personal injury
and/or equipment damage and avoiding the warranty, please
refer only to an authorized service distributor.
ITEM PART NO.
DESCRIPTION
KIT QTY
1
Swivel Shaft Male 1/2" NPT
C
1
2
PTFE SEAL
B,C
2
3
O`Ring A-019
B,C
2
4
Extended Swivel Machined
C
1
5
"E" Clip Retaining Ring B,C
1
6
Plug 1/8" Countersunk
C
1
8.776-001.0 Kit B-Swivel Repair Kit
8.776-010.0 Kit C-Swivel Complete Replacement Kit
