Kärcher 1.012-102.0 Скачать руководство пользователя страница 39

Страница: 39 / 42

Maintenance

Code

Description of code

Corrective actions – If the problem persists, call for
service

Side Broom Motor ANIN Limit. Motor

temperature is above software limit.

Throttle input range is being affected.

All modes are still allowed.

Disconnect power with the main breaker, remove the
side broom and clean.

Brush Motor PWM is being limited by

unspecified source. All modes are still

allowed.

Disconnect power with the main breaker, remove the
brush tray and clean the brushes.

Brush Motor Limited. The controller is

driving but a power-limiting condition is

active. All modes are still allowed.

Disconnect power with the main breaker, remove the
brush tray and clean the brushes.

Brush Motor Temperature High. PWM

limiting within range of High Motor

Temperature. All modes are still

allowed.

Disconnect power with the main breaker, remove the
brush tray and clean the brushes.

Brush Motor ANIN Limit. Motor

temperature is above software limit.

Throttle input range is being affected.

All modes are still allowed.

Disconnect power with the main breaker, remove the
brush tray and clean the brushes.

Traction Motor PWM is being limited by

unspecified source. All modes are still

allowed.

Ensure the grade is appropriate.

Traction Motor Reverse Limited. The

controller is driving in reverse, but a

power-limiting condition is active. All

modes are still allowed.

Ensure the grade is appropriate.

Traction Motor Forward Limited. The

controller is driving forward, but a

power-limiting condition is active.

All modes are still allowed.

Ensure the grade is appropriate

Traction Motor Temperature High.
PWM limiting within range of High

Motor Temperature.

All modes are still allowed.

Ensure the grade is appropriate.

Traction Motor ANIN Limit. Motor

temperature is above software limit.

Throttle input range is being affected.

All modes are still allowed.

Ensure the grade is appropriate.

8.644-976.0 Manual Operator CV601 RS KIRA Autonomous

Содержание 1.012-102.0











































Результаты поиска

Содержание 1.012-102.0

Отзывы:

Похожие инструкции для 1.012-102.0

Бренды по названию

Популярные бренды

Kärcher 1.012-102.0, Руководство пользователя

Результаты поиска

Содержание 1.012-102.0

Отзывы:

Похожие инструкции для 1.012-102.0

Бренды по названию

Популярные бренды