Karassn KS-858G, Руководство пользователя, Страница: 5 / 31

4.System Installation
Thank you for choosing our products! As you known, any kinds of products, to assure its credibility
and fully display all its functions, it should be installed and used correctly. So we recommend
installing by professional personnel. Otherwise, we will not be responsible for malfunctions caused
by improper installing or use. Please contacts with our local agency if you need our professional
personnel!
4.1 Install preparation
①
Firstly, make a scheme of all defense zones according to user' needs, and choose suitable kinds
of detectors.
②
Fix the setup places of all fittings, like alarm host detectors and sirens.
③
Draw a setup map marking the types and specification of detectors and cable conductors in all
zones, and marking the different usages of all kinds of color lines. Don' use the same color cables in
the different zones of the same system. (The scheme and the map should be filed for maintenance
afterwards)
Note: Consider the factors as follows when making defense scheme and drawing the map.
After making sure the credibility of detector, it should be fixed in hide places, and the alarm host
should be fixed in a place where is easy to reach but not easy to be found, and there should have
sockets nearby, it also should be near to telephone line and within the detector defense zone. Siren
or trumpet should be set in the best place. Emergency button should be set in the most convince
place.
When installing wired detector, the cable should be fixed in hide place, like line groove in ceiling.
Don' use the same color cables in the different zones of the same system.
There should be no big mental or other electrical applicants which can produce interferes (like
television
,
ir-condition, computer and micro-oven and so on) near to the install place of alarm host
and other wireless telecommunication equipment Otherwise, it will affect its normal wireless
communication function.
Considering all factors, which could cause interferes when adopting wireless detectors and wireless
siren. Usually, in open area, the distance between the above detector
,
siren and alarm host can
reach to 400m. The alarm host should be set indoors. Otherwise, in the course of transmitting,
wireless signal may be absorbed or weaken by all equipment material indoors. Moreover, other
signals of wireless equipment may make interferes to this transmit signal. Therefore, the
transmitting distance is less than 400m when used indoors.
④
.How to connect power lead with alarm host:
lll: Connect it with yellow line of power lead
N
: Connect it with brown line of power lead
L: Connect it with blue line of power lead
4.2 Start to instal l
Connection picture 1
-3-