manualshive.com logo in svg

Karassn KS-858G, Руководство пользователя, Страница: 28 / 31

Поделиться
Скачать
Karassn KS-858G Скачать руководство пользователя страница 28

All programming items can be modified on the system settings menu.

Note: "Restore factory default settings" on the APP: Wireless remote controller, detectors and 

            network parameters are not restored, all other recovery.

8.Technical Specification

8.1 Alarm host

Size: 26.4cm X 26cm X 8cm (LXWXH) excluding length of antenna

Weight: 3KG (Excluding backup battery)

Power Supply:AC220V±15%, Battey:12V/7Ah

Auxiliary Output Power:

＜

550mA

Siren Output Current: 

＜

1.5A

Total Output Current: 

≤

1.5A (the current of outer current should not over it)

Wireless Working Frequency: 433.92MHz

Wireless Communication Distance:

The distance between PIR detector and alarm host (in open area

≥

400m)

The distance between wireless door sensor and alarm host (in open area

≥

200m)

The distance between wireless siren and alarm host (in open area 

≥

400m)

Working Environment:Temperature:0

℃

-55

℃

    

Humidity:10-80%

8.2 Wireless Remote Controller

    

Voltage:12V 27A                      Standby Current:

≤

5uA

       Emit Power: 

≤

10mw                 Emit Frequency:433.92MHz

9. Operation Precaution

9.1 Do not store the Police or Fire police phone numbers directly without authorized.

9.2 Do not allowed to put alarm host  and all accessories into water.

9.3 Correct date and time in time once alarm host  powered on.

9.4 The alarm host is not explosion-proof, which cannot be directly deployed in the Class I, II or III 

   Hazard locations (i.e., where there are flammable, explosive steam gas, dusts, fibers and etc of 

   certain concentration). Otherwise, it will be very dangerous

9.5 Do not disassemble the alarm host  so as not to cause accidents and damage the apparatus.

9.6 Please contact the client service department or local agent in time if there are something broken

9.7 Please inspect routinely so as to clear troubles in time to avoid missing alarms.

-26-

Содержание KS-858G
































Отзывы:

Нет отзывов