Alarm output interface
: A set of normal open and a set of
normal close alarm output and a set of uncont 12V 300mA
output.
Normal open, normal close alarm output interface-Label on the
rear panel
The alarm host provides alarm output contact loaded 1A120VAC or
3A30VDC. It is use to control other device when an alarm occurs. It
is not allowed to input directly when the power of device is over its
loaded. To void damaging the alarm host, it need adopt relay.
DC output interface--- V+ and C end p12V-13.8V 300mA
DC voltage to offer other device. V+ is DC output anode. C end is
DC output cathode.
DC input
: A DC + 12V input interface is provided to connect the
output of an emergency power supply with a larger capacity is
required. Its polarity is
. The interface is forbidden being
shorted out. If a built-in backup power supply is selected. The
interface is forbidden inputting a voltage.
Power switch
: the power switch of the complete machine. If it is
switched off, the complete machine is power off and cannot be
operated. But the AC power supply is still charging the backup
power.
Fuse
: AC 220V5A fuse tube is adopted as the power supply fuse
of the complete machine.
AC power input
: AC22050Hz power supply.
Extension input
: to be used to connect users telephone set.
Line input
: to be used to connect the line.
2. KS-200AT wireless infrared detector
The detector will emit alarm signals once when it is power on.
1
2
3
4
5
6
7
1
2
3
4
386(
4
1
2
3
4
386(
5
2
3
6
7
&
9 9
Line
Extension
Rear panel
