Function 3
shutdown time of the first group
Hour
press
˘
key to set
Minute
press
˚
key to set
group is 12:00.
Note
: auto startup time means that the alarm host will automatically
enter into security mode (defense state) and begin to receive alarm
signals when the configured time arrives.
(3)
Set auto shutdown time of the first group
Enter into "
Auto shutdown time of the first group
" setup option,
press "
˘
" or "
˚
" key to adjust the auto shutdown time of the first
group. After the setup is finished, Press "reset" key to exit or press
"Function" key to set "
Auto startup time of the second group
".
The above figure shows that the auto startup time of the first group
is 14:00.
Note
: the auto shutdown time means that the alarm host will
automatically enter into the state of not receiving any alarm signal
(i.e., defense-deactivation state). But it can also respond to the
emergency button of the remote controller and the alarm signal from
the emergent defense area.
Enter into auto shutdown time setup mode and the alarm host will
display the follows:
(4)
Set auto startup time of the second group
Enter into "
Auto startup time of the second group
" setup mode,
press "
˘
" or "
˚
" key to adjust the auto startup time of the second
group. After the setup is finished, press "Reset" key to exit or press
"Function" key to set "
Auto shutdown time of the second group
".
The above figure shows that the auto startup time of the second
Function 4
sstartup time of the second group
Hour
press
˘
key to set
Minute
press
˚
key to set
