Kaptur KP2201, Руководство пользователя

Страница: 15 / 38

KP2201 User Manual Version 1.0-EN 15 of 38
Continuous mode
In this configuration the device start reading in continuous mode when the trigger button is pressed. The device stop at the
second pression of the Trigger. After the read of the configuration code the device enters in reading mode. To stop it just press
the trigger button.
Continuous Mode
Same Barcode Reading
When in Continuous Mode to avoid multiple reading of same bar code is it possible to set the function “Same barcode Time
out”. In this way if the read barcode is the same of the previous the good read is performed after the expired time.
Same Barcode Time Out Enable (Default)
No Time out on Same barcode reading
When the Same Barcode Time out is enabled, the delay can be programmed to:
0.5sec time out (Default)
1sec time out
3sec time out
5sec time out
Infinite time out. Use this settings if is necessary avoid the reading of the same
barcode