Kaptur KP2201, Руководство пользователя

Страница: 10 / 38

10 of 38 KP2201 User Manual Version 1.0-EN
Setting
To configure the device, it is sufficient to read the setting barcode. If the configuration code is read the scanner will emit a dual high
frequency beep
Restore factory default setting
To reset the parameter to factory refault. Use this code carefully and only if you are not sure how is configured the scanner.
RESET TO FACTORY DEFAULTS
These are the most common settings. If more settings are required please contact the manufacturer.
The factory default settings are indicated with “Default”
Interface configuration
The scanner has been configured in factory with the USB HID enabled. If it is necessary to change the interface scan one of the
below codes
USB HID interface
To configure the scanner in USB HID operating mode scan the below code
Enable USB HID (Default)