![Kapsys SmartVision Скачать руководство пользователя страница 76](http://html1.mh-extra.com/html/kapsys/smartvision/smartvision_user-manual_3450372076.webp)
SmartVision & SmartVision LITE
– User Guide (Rev. 2.5 – version SW 1454)
76
"Navigation" specific keywords
The following keywords are operational only if the Navigation mode is active.
Stop navigation
Stops the current navigation session.
Roadbook
Activates the road book during navigation.
Remaining distance
Gives the remaining distance to destination.
Last Instruction
Repeats the previous navigation instruction.
Current destination
Gives the current destination.
Arrival time
Gives the time of arrival.
Current Navigation mode
Gives the navigation mode currently in use.
Switch to Pedestrian mode
Switches to pedestrian navigation mode
without entering again the address for the
destination.
Switch to Car mode
Switches to car navigation without entering
again the destination address.
Next Instruction
Gives the next navigation instruction.
Settings
This section describes how to configure your Kapten application. Press the "
Menu
"
button to access the options, select the "
Parameters
" menu.
Settings are grouped by categories:
- "
System
": lets you specify the system settings.
- "
Pedestrian Navigation
": lets you specify the pedestrian navigation settings.
- "
Car Navigation
": lets you specify the car navigation settings.
- "
Free Navigation
": lets you specify the free navigation settings.
- "
Direct Guidance
": lets you specify the direct guidance settings.
- "
Details and update
": retrieves information about software and map updates.
Please note: you can also access the Kapten application settings by sending the
voice command: "
Parameters
" from this application.
The "
System
" settings are:
- "
Default Country
" specifies the default country set for address
“standard”
input mode.
- "
Measurement unit
": specifies distance and speed units used in the
navigation instructions (metric and imperial).
-
Delete Last Destinations
": clears the addresses selected from the list of
previous trips.
- "
Restore default settings
" restores the Kapten application factory settings.
- "
Reset the Product
": resets all settings and clears all personal data saved in
the Kapten application (Recent trips, K-Tags).