12
Working in Pulse mode with a detector:
For outdoor work under direct sunlight or bright conditions,
and for extended indoor ranges up to 70 meters, use the
pulse mode with a Detector. When the pulse mode is
activated the laser beams will flash at a very high frequency
(invisible to the human eye). This will allow the detector to
detect the laser beams.
1. The pulse mode can be activated or deactivated only in
Automatic mode.
2. Turn on the laser level.
3. Press the Pulse mode button (c) to activate it. The Pulse
mode indicator (d) will turn on. Visually, the intensity
of the beams will be a bit reduced.
4. Turn on the detector and search for the laser beam.
5. You can choose a different beam, by pressing on the
beam selector buttons, while you are in Pulse Mode.
6. To switch the Pulse Mode off, press the Pulse mode
button (c) and the Pulse mode indicator (d) will turn off.
