If your Wall Map contains 1 or 2 maps attached to spring roller and backboard, this is the
backboard mounting bracket that should be used for mounting purposes:
If your Wall Map contains 3 or more maps attached to spring roller and backboard, these
are the backboard mounting brackets that should be used for mounting:
IF END CUSTOMER USES DIFFERENT MOUNTING BRACKETS OR MOUNTS TO WALL
DIFFERENTLY THE PRODUCT WARRANTY COULD BE VOIDED
Installation of Wall Map(s) should be performed by two (2) people. Determine where
you will site your map and where you will need to drill holes. The wall maps need to be
level to the ground, so make sure they are properly marked before any holes are drilled.
The mounting bracket(s) should be:
TWO BACKBOARD MOUNTING BRACKETS
REQUIRED TO PROPERLY MOUNT TO
WALL; WILL SLIDE BACKBOARD ONTO
BOTH BRACKETS AS OUTLINED BELOW
(MAKE SURE THEY ARE LEVEL)
