Kappa Map Group Wall Map Скачать руководство пользователя страница 2

 

OVERVIEW 

Before installing your Wall Map(s), please read all the instructions and take 
note of the following items: 

 

Never STAND Wall Map(s) and Spring Roller on EITHER END during mounting 
process:  Note spring rollers are tensioned and tested to assure the highest 
quality standards are maintained prior to shipping of your Wall Map(s).  Wall 
Map(s) must be stored in a horizontal position on any flat surface. 

 

To prevent damage, use care when removing wrapping materials to avoid 
cutting into Wall Map(s). 

 

Wall Map(s) should NOT be pulled down beyond the point where full image is 
displayed and/or the sticker stating DO NOT PULL PAST THIS POINT which is 
applied to many of our Wall Map(s) 

MATERIALS ENCLOSED WITH YOUR SHIPMENT 

The box received contains your Wall Map(s) mounted to a spring roller, a 
backboard (long metal rail), and side brackets (2) with hardware to mount these to 
backboard.   

TOOLS REQUIRED FOR INSTALLATION 

7/16” Racket and/or 

Open End Wrench 

Measuring Tools 

Marker / 

Pencil 

Drill and Drill-bits 

Ladder or Scaffolding 

Screw Driver 

Level 

Screws and/or 

Screws with Anchors 

 

ATTACHING WALL MAP(S) AND ROLLER TO BACKBOARD 

Carefully remove the tape and packing paper that is wrapped around the Wall 
Map(s) and spring roller adhering it to the backboard.  (NOTE: leave paper and 
tape wrapped around Wall Map(s) and spring roller at this time) 

Содержание Wall Map










Отзывы: