CHAPTER 4.
USING KASPERSKY
ANTI-VIRUS
®
After the application is installed and the Microsoft ISA Server services are res-
tarted, Kaspersky Anti-Virus is ready to start scanning data streams because all
the parameters necessary for the scan have been already set by default. Kas-
persky Anti-Virus can be managed:
Locally, if the server part (anti-virus kernel, anti-virus database and filters
for Microsoft ISA Server) and administration tools (Administration Con-
sole) for the application are installed on the same computer;
Remotely, if the server part and administration tools are installed on dif-
ferent computers.
Please note, that in order to use remote management, the following protocols
must be employed for accessing the server:
Protocols listed in the standard ISA server policy
Allows Kaspersky An-
ti-Virus for Microsoft ISA Server Remote Management from specified
computers using MMC
. Access using these protocols can be enabled by
adding a remote computer to that system policy
The Kaspersky Anti-Virus for Microsoft ISA Server Remote Manage
-
ment Protocol. Access using that protocol is allowed by a special firewall
rule created by the installer of Kaspersky Anti-Virus.
4.1.
Default scan settings
You can configure scan settings on the tabs of the
Properties of Kaspersky
Anti-Virus for Microsoft ISA Server
dialog box. The following are the default
scan settings:
The
HTTP
tab displays settings that regulate the application performance
(see section 4.2.1.2 on page 27 for more detail) and messages sent to the
client (see section 4.4 on page 48):
Cure
HTTP traffic
– enabled
Maximum scanning duration before sending data to client, sec
– 30 seconds.
Maximum time span between chunks of data sent to the client,
sec
– 10 seconds.