Anti-virus protection
47
3. Enable the anti-virus mail protection using the
Management Console
.
5.3. Scanning attachments
In order to decrease the load on the server when the anti-virus scan is
performed, you can limit the list of the objects to be scanned and put a restriction
on the time for scanning one object. These scan restrictions will be used both for
scanning the traffic and for the background storage scan.
It is to be noted that the body of the message will always be scanned as
the restrictions apply only to the attachments.
In order to reduce the load to the server in the traffic protection mode it is
recommended not to scan e-mail messages routed by the server.
In order to define objects that will not be scanned,
1. Select the node corresponding to the server you need in the
console tree and follow the
Anti-virus protection
link in the results
pane.
2. Go
to
the
Attachment Scan
tab in the
Anti-virus protection
(see
Figure 12)
window that will open.
3. In
the
Exclude from the scan scope
group, specify objects that
you wish to exclude from the anti-virus scan scope.
4. In order to restrict the time for processing one object check the
Stop scan if it takes longer than {NN} sec
box and specify the
scan time in seconds.
5. After you are done with this setting, press the
Apply
or the
OK
button to apply the changes.
Содержание ANTI-VIRUS 5.5 - FOR MICROSOFT EXCHANGE SERVER 2000-2003
Страница 1: ...KASPERSKY LAB Kaspersky Anti Virus 5 5 for Microsoft Exchange Server 2000 2003 Administrator s Guide...
Страница 60: ...60 Kaspersky Anti Virus for Microsoft Exchange Server Figure 23 Creating the background scan schedule...
Страница 107: ...Reports 107 Figure 60 Viewing a report delivered by e mail...