Kaon KVR-1000, Руководство пользователя

Страница: 39 / 61

78
1
2
3
4
5
6
7
?
77
2
Web Admin Mode
If you want to execute Web Admin Mode, you should connect to the receiver via
Internet Explorer. To do this the network configuration has to have been completed
already. If the admin PC and the receiver are not on the same network, you cannot
use RMCS Admin Mode. In this case you should use Web Admin Mode.
You can set the Network, Sensor, Video and User using Web Admin Mode. If you
want to adopt the settings into the receiver, you should click the
Apply button.
Items Descriptions
Reboot Reboots the receiver. Since it is not connected to
the receiver during rebooting, close Internet
Explorer and restart after a minute.
Apply
Saves the settings to the receiver. If you want to
adopt the settings into the receiver, you must
reboot. Since it is not connected to the receiver
during rebooting, close Internet Explorer and restart
after a minute.
Refresh
Reads the settings saved in the receiver and re-
executes.
Viewer
Moves to the RMCS Viewer page.
7.3 Admin Mode
Using Admin Mode, you can set general settings such as the network and video. If the
admin PC and the receiver are on the same network, when the RMCS Searcher is
executed the RMCS Admin Mode appears. Use the Web Admin Mode that appears
after connecting the receiver through the RMCS Admin Mode or Internet Explorer
If the admin PC and the receiver are not on the same network, you can use the Web
Admin Mode. When you use the Web Admin Mode, you should connect to the receiver
via Internet Explorer. At this point, the network configuration of the receiver has to have
been completed already. Therefore, you should use the RMCS Admin Mode executing
the RMCS Searcher at the initial setting.
1
RMCS Admin Mode
The RMCS Admin Mode can only be used when the admin PC and the receiver are
on the same network. If you click the MAC address executing the RMCS Searcher
and enter the precise log-on information, the RMCS Admin Mode window will
appear as follows (Refer to the RMCS Searcher). You can set the Network, Sensor,
Video and User using the RMCS Admin Mode. If you want to adopt the set value to
the receiver, you should click the
Save
button.
Items Descriptions
Reboot
Reboots the receiver. Since it is not connected to the receiver during rebooting,
close Internet Explorer and restart after a minute.
Default Initializes all settings to the factory defaults. After initialization, if you want connect
to the receiver via Internet Explorer you will have to input the network
configuration again.
Save
Saves the settings to the receiver. If you want to adopt the settings into the
receiver, you must reboot.
Close Closes the RMCS Admin Mode.