76
1
2
3
4
5
6
7
?
75
• If a specific port is closed due to a firewall the MAC
address might not be displayed. In case the MAC
address is not displayed due to a firewall or individ-
ual firewall program, open the setting data transmis-
sion port (UDP : 12344) of the RMCS Searcher.
(Refer to the network administrator).
• If you set for connecting the admin PC and the
receiver directly without a hub or router, and if the
network card transmission speed of the PC is
100Mbps, the RMCS Searcher might not recognize
the receiver. Change the network transmission
speed of the PC to 10Mbps.
Control Panel -> Network and Dial-up
Connections -> Local Area Connection ->
Properties -> Configure -> Advanced -> 'OK'
3
RMCS Searcher Execution
Connect the receiver to the power source and
execute the RMCS Searcher after the PC and the
receiver have been connected to the same
network. As shown in the following picture, all
MAC addresses of the receiver on the same
network will be displayed. Booting takes about a
minute. If the MAC addresses are not displayed
on the RMCS searcher click the
Refresh
button
to restart.
If you click the MAC addresses of the desired
server after checking the MAC addresses
displayed on the RMCS Searcher, the
Login
window will appear as in the following picture.
Enter the administrator account and the password
and then click the
OK
button. The default ID and
password are as follows;
User Name: root
Password: pass
If the correct ID and password is entered, Admin
Mode will be executed as follows and the network
setting display window will be activated. When the
network setting is completed click the
Save
button.
Содержание KVR-1000
Страница 35: ...70 1 2 3 4 5 6 7 69 ...
