Kaon KVR-1000, Руководство пользователя

Страница: 28 / 61

56
1
2
3
4
5
6
7
?
55
4
Display
Press the
UP/DOWN
button on the Setup list to
select
Display
and press the
OK
button.
Press the
UP/DOWN
button to select either
Screen Type, Menu Transparency, SCART
Output, SPDIF Output, RF Channel, RF Mode
or TV Type and then press the
RIGHT
button to
move to the right pop-up menu.
Screen Type
If you have a TV set with the 4:3 picture format and
the transmission is in 16:9, you can select 4:3
letterbox, 4:3 full screen and 16:9 full screen.
Select the aspect ratio of TV which is connected to
the receiver and then press the
OK
button.
Menu Transparency
From 20% to 100% will give the variable
transparency on Video and OSD screen.
To set menu transparency, press the
UP/DOWN
buttons.
The transparency will be applied on the screen.
A/V Output
If your TV input supports SCART-RGB control, select
SCART-RGB. Otherwise select SCART-CVBS. If
your TV input supports S-VHS, select S-VHS.
• Full screen will fill up the screen but cut off some
information on the left and right sides.
• Letterbox will give a complete picture, but leave
black areas at the top and bottom.
• For easy selection of Screen Type, press the P.SIZE
button on your remote control.
3
Lock Control
Press the
UP/DOWN
button on the Set list to
select
Lock Control
and then press the
OK
button.
Press the
UP/DOWN
button to select either
Menu
Lock , Parental Lock , Receiver Lock or Change
PIN Code
and then press the
RIGHT
button to
move to the right pop-up menu.
Menu Lock
If the Menu Lock is already set, the PIN code is
needed to set the Edit Channel List and System
Setting.
If you want to set the Menu Lock, press the
UP/DOWN
button to select
Locked
and then press
the
OK
button.
Parental Lock
When you change “Parental Lock” to “On” or “Off”,
service channel can get or not from that set values. If
you select “On”, you may need PIN code every time
you select the lock channel program as you set in the
channel control.
If you select “Off”, you can see all channels without
PIN code.
Receiver Lock
If you select “On”, you will have to enter the PIN code
every time you start the receiver from standby.
Change PIN Code
From here you can change the PIN code from the
standard 0000. DO NOT FORGET IT! Without it, you
are not able to access to any of the functions where
the code is required.
You can change password for Parental Lock and
Receiver Lock simultaneously.
Input the current PIN code using the
NUMERIC
button on the remote control.
In the highlighted new PIN code, input a new PIN
code.
To verify the new PIN code, re-enter a new PIN
code in the highlighted confirm PIN code. If the
PIN code is correct, the message “Success” will
be displayed on the display window.
• If you forget the PIN
code, press the
RGYB(Color) button in
sequence. (i.e. Red ->
Green -> Yellow ->
Blue button) The PIN
code will be changed
to
0000 .