Kaon AR2146, Руководство пользователя

Страница: 24 / 30

24 Kaonmedia Proprietary and Confidential. Copyright 2017 KAON MEDIA CO., LTD. All Rights Reserved.
1) WAN IF Name
It shows which WAN interface to use in case the AR2146 uses multiple WAN interfaces.
2) WAN Service
User can choose how to connect to the server either via PPP over Ethernet or Bridging mode. When the user select
“PPP over Ethernet”, the user can manually configure the rest of the menu below. When the user select “Bridging”,
802.1 P priority get set to “-1” and 802.1Q LAN ID get set to “-1” and all other parameters below become deactivated.
3) Enter 802.1P Priority (0-7)
User can select the priority to the specific WAN interface he selects in the WAN IF Name. 7 is the highest priority. If the
user do not want to put any priority, the user can set “-1”.
4) Enter 802.1Q VLAN ID (0-4094)
User can set the VLAN ID to the specific WAN interface he selects in the WAN IF Name. If the user do not want to put
any VLAN ID, the user can set “-1”.
5) Select VLAN TPID
TPID is the tag protocol identifier. User can choose either 0x8100, 0x88AB, or 0x9100.
6) Protocol
User can select IPv4 Only , IPv4 & IPv6 (dual stack), or IPv6 only.
7) WAN IF Setting
User can select either one of the following mode; Auto, RAP, CHAP, MSCHAP to obtain the IP address of the WAN
interface.
8) PPP User Name
User can enter the user name for the PPPoE to activate the network service. When the user enters the correct PPP
user name and PPP password, this CPE get authenticated by the PPP server and the internet service will be activated.
User can enter the PPPoE username and password If ISP provides and requires the PPPoE information.
8.1.2 WAN Service - PPPoE
PPP over Ethernet
PPP over Ethernet
Bridging mode
0x8100
0x8100
0x88AB
0x9100
1
2
3
4
5
6
7
8
9
10
11
12