22
Kaonmedia Proprietary and Confidential. Copyright 2017 KAON MEDIA CO., LTD. All Rights Reserved.
1) WAN IF Settings
You can set the WAN interface information.
1-1) WAN Service
A user can choose either “IP over Ethernet” or “Bridging” mode. When the user select “IP over Ethernet”, the user can
manually configure the rest of the menu below. When the user select “Bridging”, 802.1 P priority get set to “-1” and
802.1Q LAN ID get set to “-1” and all other parameters below become deactivated.
1-2) Protocol
A user can select IPv4 Only , IPv4 & IPv6 (dual stack), or IPv6 only.
1-3) WAN IF Setting
A user can select either one of the following mode; “User the following static IP address” or “obtain an IP address
automatically”.
2) NAT
A user can enable or disable NAT (Network Address Translation) function.
3) Firewall Settings
You can set the Firewall information.
3-1) IPv4 Firewall Protection
User can enable or disable the basic firewall functions.
4) Interface
It shows the interface information like Wi-Fi interface or Ethernet interface.
5) Description
It shows which authentication method is used e.g. IPoE or PPPoE.
6) IGMP Proxy
It shows whether IGMP Proxy is enabled or disabled.
7) NAT
It shows whether NAT is enabled or disabled.
In this page, you can configure IPoE for WAN service connection.
8.1.1 WAN Service - IPoE
1
2
3
4
5
6
7
8
9
10
11
1-1
3-1
1-2
1-3
12
Содержание AR2146
Страница 2: ......
