Kantronics KAM, Инструкция по эксплуатации

Страница: 10 / 55

CONNECT COMPUTER
6
DB-25 Connector
Male (Looking at Pins)
Female (Looking at Holes)
DB-9 Connector
Male (Looking at Pins) Female (Looking at Holes)
TNC (DCE)
Prewired
RS-232
Computer (DTE)
Pin Name DB-25
Pin No.
DB-9
Pin No.
Cable
Color
Direction DB-25
Pin No.
DB-9
Pin No.
FG*
TXD
RXD
SG*
RTS
CTS
DCD
DSR
DTR
1
2
3
7
4
5
8
6
20
N/A
3
2
5
7
8
1
6
4
black
white
red
orange
green
brown
yellow
blue
purple
  
  
  
  
  
  
  
  
  
1
2
3
7
4
5
8
6
20
N/A
3
2
5
7
8
1
6
4
mark
space
test
+12 V
11
18
18
25
( KAM ) To external scope, if desired
( KAM ) To external scope, if desired
( KPC-2 ) DO NOT CONNECT TO COMPUTER
DO NOT CONNECT TO COMPUTER
*FG (Frame Ground) and SG (Signal Ground) are tied together in the TNC. The shield is on pin 1
of the DB-25 and on pin 5 of the DB-9. The black wire is not connected in the KPC-4 serial cable.
The functions of these lines are explained below:
DB-25 Pin 2 TXD DB-9 Pin 3
Transmit Data. This line is the serial data from the terminal which is to be transmitted to the other
station by the TNC. It is this line which is used for all communication from your terminal to the
TNC, including commands.
DB-25 Pin 3 RXD DB-9 Pin 2
Receive Data. This line is used by the TNC to send the data it receives from the other station to
your terminal. This line is also used to send TNC messages to your terminal.