15
Ｍ
Ｍ
Ｍ
Ｍ
Ｍ
Ｍ
Ｍ
Ｍ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ａ
Ｃ
Ｃ
Ｃ
Ｃ
Ｃ
Ｃ
Ｃ
Ｃ
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
■
Wiring of clutch motor and control box
Connect the electric cord (E) of the
clutch motor (B) to the terminal of the
relay socket (C) in the control box.
If the electric cord of the clutch motor is
already connected to the ON-OFF switch
of the table, remove it and re-connect it
to the terminal of the relay socket (C).
Then, connect the electric cord (D) of the
relay socket (C) to the ON-OFF switch.
In case of 3 phase motor, connect to the terminal 1, 2, 4 on the upper row of the relay
socket (C). In case of single phase motor, connect to the terminal 1,2 on the upper row of
the relay socket (C). Make sure to connect the earth cord (green or green / yellow color)
to (F) together with the earth cord of the electric cord (D).
■
Wiring of the electric cord (D)
The following fig. is the wiring method of 3 phase
cord. In case of single phase, connect to only 2
cord.
Make sure to insulate one more cord (black color) by
an insulating tape etc. Also make sure to connect
the earth cord to (J).
< Specifications >
Power source:
Available in the following voltages AC 100~240V
＜
Note
＞
When connecting electric cord, make sure to turn
off the switch of main power source.
