kansai FX SERIES, Инструкция

Страница: 3 / 20

CONTENTS
1. SPECIFICATIONS
1-1 Stitch type ··············································· 1
1-2 Models ···················································· 1
1-3 Diagrammatic sketch of the Series ·············· 1
2. NEEDLES & THREADING THE MACHINE
2-1 Needles ··················································· 2
2-2 Replacing the needle ································· 2
2-3 To thread the machine ······························ 2
3. MACHINE SPEED
3-1 Machine speed & direction in which the machine
pulley runs ·············································· 6
3-2 Motor & belt ············································ 6
4. LUBRICATION
4-1 Oil ························································· 7
4-2 To fill the machine with oil ························ 7
4-3 Replacing the oil and the oil element ··········· 7
5. SEWING MACHINE INSTALLATION
5-1 Cutting the machine table ························· 8
5-2 How to install the machine ························ 9
6. TIMING OF THE LOOPER TO THE NEEDLES
6-1 positioning the looper and the looper rocker 10
6-2 Looper left-to-right movement ·················· 10
6-3 Looper setting distance ··························· 11
6-4 Needle height ········································ 11
7. TIMING OF THE RETAINER LOOPER
7-1 Installing the retainer looper ··················· 12
7-2 Timing of the retainer looper to the needle · 12
8. ADJUSTING THE NEEDLE GUARD
8-1 Position of the needle guard ····················· 12
9. ADJUSTING THE FEED DOG & STITCH LENGTH
9-1 Feed dog height & tilt ····························· 13
9-2 Stitch length ·········································· 13
10. ADJUSTING THE PRESSER FOOT
10-1 Presser foot pressure ····························· 14
10-2 Position of the presser foot and foot lift ····· 14
11. ADJUSTING THE REAR PULLER DEVICE
11-1 Manual lever and position of the stopper···· 15
11-2 To adjust the puller pressure ·················· 15
11-3 To adjust the feeding amount of the rear puller
···························································· 15
12. ADJUSTING THE STITCH FORMATION
12-1 Thread tension adjustment ····················· 16
12-2 Position of the needle thread eyelet ·········· 16
12-3 To adjust the needle thread guard ··········· 16
12-4 Position and timing of the looper thread take-up
eyelet ·················································· 17
13. CLEANING THE MACHINE
··················· 17