kansai FX SERIES, Инструкция

Страница: 18 / 20

【
11
】
ADJUSTING THE REAR PULLER DEVICE
11-1 Manual lever and position of the stopper
To position or remove the fabric, raise manual lever
A. With the manual lever lowered, hold stopper B
so that the clearance between the upper and lower
pullers is 0.5mm. Then tighten nut C.
11-2 To adjust the puller pressure
The puller pressure should be as light as possible,
yet be sufficient to feed the fabric smoothly.
To increase the pressure, turn adjusting knob D
clockwise. To decrease the pressure, turn adjusting
knob D counterclockwise.
11-3 To adjust the feeding amount of the rear puller
Adjust the feeding amount of the rear puller
according to that of the feed dog.
To increase the amount, loosen nut E and move it
down. To decrease the amount, loosen nut E and
move it up.
15