5
4444----2 Installing the machine
2 Installing the machine
2 Installing the machine
2 Installing the machine
■
Non-submerged installation
Install the machine correctly by
referring to the illustration.
Install the bolts and nuts to the machine
table. Fit the rubber cushions onto the
bolts. Then mount the machine
properly onto the rubber cushions.
■
Replacing the belt cover
Install the belt cover correctly by referring to the
illustration.
【
5
】
TIMING OF THE LOOPER TO THE NEEDLES
5555----1 Angle and height
1 Angle and height
1 Angle and height
1 Angle and height for installing the looper
for installing the looper
for installing the looper
for installing the looper
To obtain the proper angle and height, insert the looper
fully into looper holder A and then tighten screw B.
The proper angle for the looper is 2.5º.
Distance at 25mm from the point of the looper between
the bottom of the looper blade and the extension line
from the point of the looper: Approximately 1.1mm
