219 Route 206 Phone: 1-800-247-8887
PO Box 372
Fax: (973) 786-7586
Andover, NJ 07821 USA [email protected]
6824
™
User Manual, PN 10283
Kanomax USA, Inc
Rev 1.0, 30-July-2021
www.kanomax-usa.com
Copyright © 2021, Kanomax USA, Inc.
Page 13 of 28
TM
Press the MAX/MIN key to record and display the maximum reading
for either temperature or air velocity. The maximum reading display
will alternate with the letter “H” displayed with the sample rate. Press
the MAX/MIN key again to record and hold the minimum reading.
The minimum reading display will alternate with the letter “L” displayed with
the sample rate.
For example:
alternating with
+
signifies that 1065 is the highest airspeed
reading since the MAX/MIN key was pressed, and the sample rate is set to 8
seconds.
alternating with
/
signifies that 82 is the lowest airspeed
reading since the
MAX/MIN key was pressed, and the sample rate is set to 16
seconds.
To exit MAX/MIN mode, press the SAMPLE RATE key.
Press the HOLD/RESET key to freeze the current reading on the
display.
HOLD
is displayed on the LCD and the reading is held.
Press the HOLD/RESET key a second time to clear this mode and return the unit
to normal operation.
Press the HOLD/RESET key while in MIN/MAX mode to display BOTH the
minimum and maximum readings since the MAX/MIN key was pressed. Once
the HOLD/RESET key is pressed while in MAX/MIN mode, new readings are
no longer recorded. To return to MAX/MIN mode, press the HOLD/RESET
key again.
