Kannad Marine SafeLink EPIRB, Руководство пользователя

Страница: 22 / 32

Page 17 of 25
13. BATTERY REPLACEMENT PROCEDURE

DO NOT CHARGE THE BATTERY

DO NOT THROW IN FIRE

DO NOT EXPOSE TO TEMPERATURE OVER 90°C

DO NOT SHORT CIRCUIT
Important: The replacement of the battery pack may be performed by the user (if authorized
by local authorities) who will only use factory replacement pack (P/N 1202368).
CAUTION: Many states have regulations in place requiring some form of battery recycling.
Please refer to your local authorities before disposal.
13.1. Battery pack removal
(1) Using a standard cross head screwdriver, fully unscrew the housing of battery pack located at
the lower part of the beacon.
(2) Remove the housing.
(3) Disconnect the white connector (a) located in the bottom of the housing and remove the
connectors harness (b).
(4) Disconnect the battery pack from the connectors harness (b) by lifting up the locking straps of
the 3 male connectors (c).