5/11
program, display as follows:
Mode setting: move the cursor to Mode and press ENTER to access to Modes
choice, display as below
Note: Which regeneration mode is identified in the light of actual technique. Volume mode selection
requires flow sensor matched that can generates rectangular pulse. (We recommend JM-TT flow
sensor to match JMA Stager Controller usage)
If Volume mode is selected as regeneration initiation mode, then move cursor to Volume
and press ENTER to get into Volume mode setting, display as below
Note: K value is pipe coefficient. P is Total volume.
Press
and
keys to input K value and P value, and then press ENTER to
confirm . Accumulative volume value checked by moving cursor on “
∑
” and press
ENTER, then display as below
To remove accumulative volume value, press ENTER on the above display and type
password “4321”. Then press ENTER to confirm this performance. When setting week
Mode Business
\
Mode: Volume
Remote
Interval
Week Timing
K: 000.000
P: 00000.0 t
: (CLR 0000)
0000000.0 t
∑
∑
