KanexPro MX-HDBT8X818G, Руководство пользователя

Страница: 13 / 43

13
diagram is shown as below.
1. At Matrix End: The 3.5mm jack IR blaster cable is inset the IR OUTPUT
port and the 3.5mm jack IR receiver cable is inset the IR INPUT port at the
rear of the Matrix. If you want to control the HDMI input source device such
as DVD, the IR blaster head is putted the DVD aside. IR receiver head
receives the remote-control signal about the HDBaseT
‘
s display device.
2. At HDBaseT Receiver End: The 3.5mm jack IR blaster cable is inset
the IR OUT port and the 3.5mm jack IR receiver cable is inset the IR IN port
at the rear of the HDBaseT Receiver. If you want to control the HDMI output