KanexPro MX-HDBT8X818G, Руководство пользователя

Страница: 8 / 43

8
“
Down
”
button to select storage location. Then
press the
“
Right
”
button again to confirm this
operation.
④
Recall Preset: Press the
“
Right
”
button to recall
previous preset configuration, press
“
Up
”
or
“
Down
”
button to select storage location. Then
press the
“
Right
”
button again to confirm this
operation.
⑤
View IP: Press the
“
Right
”
button to check IP
address and DHCP status.
⑥
Select Baud: Press the
“
Right
”
button to enter
baud selection, press
“
Up
”
or
“
Down
”
button
to select baud. Then press the
“
Right
”
button
again to confirm this operation.
⑦
Factory Reset: Press the
“
Right
”
button to
enter factory reset option, press the
“
Right
”
button will set the product to factory reset status, and
press the
“
Left
”
button will go back to the previous
step.
4 Power button Pressing this button will power on the product or long
pressing this button will set the product to standby
status.
5 Power LED The LED will illuminate in green when the product is
powered
on or illuminate red when the product is standby
status.
5.2 Rear Panel