background image

6x1 Collaboration Switcher w/ 4K & Audio output 

30 

11. Customer Service 

The return of a product to our Customer Service implies the full agreement of the terms 
and conditions hereinafter. There terms and conditions may be changed without prior 
notice. 

 

1) 

Warranty

 

The limited warranty period of the product is fixed three years covering parts & labor 

 

2) 

Scope

 

These terms and conditions of Customer Service apply to the customer service 
provided for the products or any other items sold by authorized distributor only. 

 

3) 

Warranty Exclusion

 

 

Warranty expiration. 

 

Factory applied serial number has been altered or removed from the product. 

 

Damage, deterioration or malfunction caused by: 

 

Normal wear and tear. 

 

Use of supplies or parts not meeting our specifications. 

 

No certificate or invoice as the proof of warranty. 

 

The product model showed on the warranty card does not match with the 
model of the product for repairing or had been altered. 

 

Damage caused by force majeure. 

 

Servicing not authorized by distributor. 

 

Any other causes which does not relate to a product defect. 

 

Shipping fees, installation or labor charges for installation or setup of the 
product. 

 

4) 

Documentation

 

Customer Service will accept defective product(s) in the scope of warranty 
coverage at the sole condition that the defeat has been clearly defined, and upon 
reception of the documents or copy of invoice, indicating the date of purchase, the 
type of product, the serial number, and the name of distributor. 

 

Contact us at Toll free (888)875-1368 x117, Interna1(714)332.1681

 

  or email directly to 

[email protected]

 

 

Содержание HDSC61D-4K




































Отзывы: