6x1 Collaboration Switcher w/ 4K & Audio output
25
8.2.4
EDID Management
Command
Function
Feedback Example
EDIDR[xxxx].
Read the preset EDID. [xxxx] represents
the 4-pin DIP switch status.
EDID_0001!
…
EDIDUSE[xxxx].
Invoke the preset EDID. [xxxx] represents
the 4-pin DIP switch status.
EDIDUSE0001!
EDID_RS232&GUI_MODE!
EDID0001!
⚫
User-define EDID
There are four EDID values can be customized by sending the below command.
Note: When send the below commands to configure EDID, the 4-pin EDID DIP switch
on the rear panel must be in the “1111” status.
Command
Function & Operation
EDIDW[xxxx].
User-define EDID. xxxx = 1011, 1100, 1101 or 1110.
Operation:
Step 1:
Prepare the EDID file (.bin).
Step 2:
Set the 4-pin DIP switch to
“1111” status.
Step 3:
Send the command “
EDIDW1101.
”, and the feedback is “
PLEASE
SEND THE EDID FILE!
”.
Step 4:
Send the
EDID file (.bin). If successfully upload, the feedback is:
“
RECEIVED THE FILE, LENGTH=134!
EDID1101 UPDATE SUCCESSFULLY!
”
8.2.5
Audio Control
Command
Function
Feedback Example
IISON.
Turn on the stereo analog L/R audio
output.
IIS OUT ON!
IISOFF.
Turn off the stereo analog L/R audio
output.
IIS OUT OFF!
SPDIFON.
Turn on the Toslink digital audio output.
SPDIF OUT ON!
SPDIFOFF.
Turn off the Toslink digital audio output.
SPDIF OUT OFF!
