KanexPro 4K HDBaseT MX-HDBASE4X4-4K, Руководство пользователя

Страница: 19 / 44

4K HDBaseT™ 4x4 Matrix Switcher
MX-HDBASE4X4-4K 13
www.kanexpro.com
2) Force Carrier
a) Only if the IR receiver connected to HDBaseT receiver is with IR carrier, can the
received IR signal be transferred to IR OUT port of the matrix.
b) Only if the IR receiver connected to IRALL IN port of the matrix is with IR carrier, can
the received IR signal be transferred to IR OUT port of the matrix.
If the IR receiver connected with HDBaseT receiver or IR ALL IN port of the matrix is
not with IR carrier, send the command “%0901.” to enter infrared carrier enforcing
mode, and then IR signal can be transferred to IR OUT port.
3) IR control setting
l Control far-end output device from local
Connect an IR receiver with IR carrier to the IR IN port of the Switcher; users can control
far-end output displayer via its IR remote from local.
In that case, the IR signal is transferred via twisted pair. Only the corresponding IR OUT
port can emit control signals to the remote display.
See the figure below:
Control far-end device from Local
Note: The IR receiver connected to IR IN must be with IR carrier
The IR signal received from IR ALL IN port will be transmitted to all the 4 far-end
HDBaseT receivers connected to HDBaseT ports of the Switcher. See below:
PoC
Receiver
DVD
HDTV
IR Remote
HDTV
IR Emitter