CLEANING
This product can be cleaned using a damp lint free cloth and a small amount of
non-abrasive detergent. Take care to avoid moisture entering the sensor’s grill
and after cleaning leave the product in a warm dry place to allow any surface
dampness to evaporate. Under no circumstance should any solvent cleaner be
used as this may cause damage to the plastic case, display and sensor.
ANNUAL RECALIBRATION AND SERVICE
Although sensor life is typically more than five years, the monitor should be re-
calibrated and serviced annually to stop any long-term sensor or electronics
drift or accidental damage.
Local regulations may require more frequent re-calibration.
In the UK Kane International has service facilities at Atherton near Manchester
(Tel: 01942-873434), the primary service centre for UK customers and at
Welwyn Garden City in Hertfordshire (Tel: 01707-375550), the primary service
centre for non-UK customers.
By sending your monitor back to Kane for an annual fixed price service (check
www.kane.co.uk
for details) you have the opportunity to extend the warranty on
your monitor to 5 years.
