AUTOplus manual
Page 32
5. PRINTING INFORMATION – OPTIONAL EXTRA ONLY
Supplied as an accessory for the analyzer is an infrared thermal printer. Read
the manual supplied with the printer prior to operation. Connections to the
analyzer are detailed below:
•
Infrared thermal printer
- this does not require a cable to transmit the data
but uses an infrared (IR) link similar to a TV remote control. The IR emitter is
positioned on the top of the Analyzer and the bottom of the printer. Ensure
they are pointing at each other and within 300 mm, with no obstructions in the
way. Data may be lost if transmission is interrupted, a black square is
evidence of this. Keep the Analyzer pointing at the printer until the printout
has finished.
Data can either be printed from a ‘live’ test or from stored data.
5.1 Printing a ‘Live’ Test
During a vehicle test the Analyzer will print data on request. With the analyzer
showing the MAIN DISPLAY press
and hold until the second bleep.
Current data will be sent to the printer. If the print button is held until the third
bleep, the test results will be printed in duplicate.
5.2 Standard Printout
The standard printout is shown below:
AUTOplus V1.00
SERIAL No. 030912287
Kane Auto Plus
(44) - 1707 - 375550
DATE:
09/07/12
TIME:
08:25:33AM
VEHICLE
AB11 DEF
FUEL
GAS/PETROL
CO2
%
0.0
CO
%
…
0.1
O2
%
20.95
HC
ppm
0
COK
%
----
Lambda
----
