background image

KANE905 Operators Manual 

 

Page 14

 

LINE SCROLL MODE 

 
Line scroll mode allows you to customise the display. 
 

Use the 

and

keys to change the bottom line of the display. 

Once the correct line is displayed press

to confirm and move the 

line up. Select the next parameter and repeat until all lines display the 
desired parameters. 
 

Change bottom line using  

and

 

NETT 

0.0 

O2 

20.9 

CO 

ppm 

0000 

CO2 

0.0 

 

to select and move 

parameter up 

 

O2 

… 

20.9 

CO 

ppm 

… 

0000 

CO2 

… 

0.0 

CO2 

… 

0.0 

 

Select next parameter. 
Repeat above until  

display reads desired data 

O2: 

… 

20.9 

CO: 

ppm 

… 

0000 

CO2: 

… 

0.0 

CO/CO2 

… 

0.0001 

 

 

8 PAGE MODE 

 
Displays 8 parameters on the screen at one time. Symbols used in this 
mode are different from those used in 4 page and line scroll modes and 
are detailed in APPENDIX A - MAIN DISPLAY PARAMETERS. 

 

 

O2   : 

20.9% 

CO2: 

20.9 

 

CO  : 

0ppm 

Eff: 

0000 

 

PI     : 

 

T:

 

0.0 

 

      : 

 

Tf: 

0.0001 

 
The bottom line of the display can be changed to display other 
parameters. 
 

Use the

and

keys to change this line.

 

Содержание 19711















































Отзывы: