Kanardia INDU ALTIMETER, Руководство пользователя

Страница: 28 / 33

Altimeter — Manual 7.5 CAN Bus Power Schematics
Figure 7: Connection solution with one switch controlling two cir-
cuits.
7.4.2 Solution with Two Switches
In this case you are using two independent SPST switches. They
allow you to get all four combinations from the table above.
Figure 8: Connection solution with two switches.
7.5 CAN Bus Power Schematics
Each Indu Altimeter has two CAN bus connectors at the back. In the
case of backup battery, only one connector provides backup power to
other connected instruments. The power is limited to 150 mA at 12V
(1.8 W).
Typically, Indu Airspeed Indicator is protected with the backup bat-
tery from Indu Altimeter. Connection schematic for such case is
shown in Figure 9 on page 27.
26
©
Kanardia 2015-2020