Kanardia INDU ALTIMETER, Руководство пользователя

Страница: 17 / 33

Altimeter — Manual 2.2 Connections
Altimeters equipped with backup battery have slightly different CAN
bus connectors.
In this case only one connector provides output
power, while the second one does not. Connector that provides power
is marked with red
CAN label. A device connected to this connector
will also get backup power from Indu Altimeter in the case of main
power bus failure. This backup power is limited to 150 mA at 12 V,
which typically allows connection of one other Indu instrument.
2.2.3 Illumination
LCD display brightness level can be adjusted. Here are two options:
new instruments have a push-rotate knob, while older instruments
have only rotating knob. When Indu Altimeter is connected to the
CAN bus, the knob adjusts brightness of all instruments connected
to the bus.
On instruments with a push knob, simply push the knob, adjust the
brightness and push the knob once more.
For instruments with only rotation knob, an optional external il-
lumination knob can be connected to the back of the instrument.
Illumination knob part number is I-ALT-ILLUM and it must be or-
dered separately. Please refer also to section 3.4 on page 19 for the
activation procedure.
2.2.4 Power -
POWER
Connect supplied connector at the back of Indu Altimeter. The con-
nector has a notch on one side, which protects from wrong orienta-
tion.
Connect blue lead to negative (ground) terminal and red lead to
positive (+12-24 V) terminal.
15
©
Kanardia 2015-2020