Kanardia INDU ALTIMETER, Руководство пользователя

Страница: 18 / 33

Altimeter — Manual 3. Adjustments
2.2.5 Green 6-Pin Connector - Backup Battery
This connector is used only with the backup battery option. Out of
6 pins, only pin 1 and pin 2 are in use and pins 3-6 are not used.
When pins 1 and 2 are connected together (shorted), then the backup
battery circuit is active. Please refer to section 7.4 on page 25 for
more details.
3 Adjustments
The QNH knob is used to perform some adjustments of Indu Altime-
ter. In fact, this knob may be also used to adjust IAS, when such
instrument is connected to the CAN bus.
3.1 Altitude Adjustment - Static Sensor Offset
1020
→
999
→
1013 for hPa or 30 . 12
→
29 . 50
→
29 . 91 for inHg.
A minor sensor offset may be required in order to adjust Indu Al-
timeter according to some other reference instrument. Please, follow
the steps given below in order to make the adjustment. A precise
reference instrument is needed in this procedure.
1. Set both the reference instrument and Indu Altimeter to 1013
hPa and compare the readings. Write down the altitude shown
by the reference.
2. Turn the knob on Indu Altimeter to indicate 1020 hPa (30.12
inHg) and wait for about 3 seconds for a short cyan line to
appear on the top of LCD display.
16
©
Kanardia 2015-2020