Kanardia Horis, Инструкция по установке и эксплуатации

Страница: 50 / 63

Horis User Manual 4.6 Settings
4.6.6 Direction Indicator
Only the Data source parameter can be set for direction indicator.
Two options are available here.
•
MAGU – Magu electronic compass is used as direction source
or
•
GPS track – GPS track is used as direction source.
If MAGU is selected as direction source and Magu is not present, this
selection will be ignored and Horis will take GPS track instead.
If MAGU is present and GPS track is selected as data source, mag-
netic compassed is disabled. This option can be useful, when MAGU
is connected to the CAN bus, but its calibration is poor or one of its
sensor is defective.
4.6.7 G-Meter
The G-Meter screen can be configured with the following parameters,
see also figure 29:
•
Scale defines overall range of the scale shown on the screen.
You can choose the following ranges:
– -2 : 4 defines low end to -2 G and upper end to +4 G.
– -3 : 5 defines low end to -3 G and upper end to +5 G.
– -5 : 7 defines low end to -5 G and upper end to +7 G.
•
Red low defines negative G red limit.
•
Green low defines negative G green limit.
•
Red high defines positive G red limit.
50
©
Kanardia 2021