1
Operation Instruction Manual
KAM-TC1000
Precision Temperature Controller
Kamweld Industries Inc.
Introduction
Thank you for
purchasing Kamweld's Percision
temperature controller
, KAM-TC1000
. We
sincerely appreciate your decision and trust that our controller will meet your expectations in
both the quality of the result and the value of the product. While we are delighted that you may
be anxious to operate the controller, please spend a few minutes reading through this
manual
.
In particular, we urge you to read through the safety warnings below. Although this
plug-and-play controller is very easy to use, the process involves high temperature and
high wattage appliances and your safety is paramount.
SAFETY WARNINGS
•
This controller is designed only to be used with limited-power device and paring thermal
cutoff protection such as a thermostat.
•
Do not place any objects on the top of controller surface because that may prevent
venting excess heat during its operation.
•
The controller can handle a maximum current up to 15 Ampere. For 120 VAC in US or
Canada, this limits the heater power to 1800 watts. Due to its compact size and the
splash proof design, the controller has a limited ability to dissipate
the heat generated by
the internal solid state relay during the initial heat up. The initial full
power heat up
process cannot be more than 90 minutes. If you
r
system take
s
longer
time to warm
up,
please read Appendix 1 “Managing the heat generated by the
controller
”