Kamstrup MULTICAL 401, Техническое описание

Страница: 62 / 75

TECHNICAL DESCRIPTION MULTICAL
®
401
5512-091 GB/02.2008/Rev. J1
62
14.2.5 Options
The menu has a few settings which are not used very often:
Verification data See section 14.3.3 Verification data .
COM port Indicates the choice of COM1...8
14.2.6 Window
This function makes it possible to shift between the open dialog boxes.
14.2.7 Help
About Includes program numbers and revisions.
Figure 55
14.2.8 True energy calculation
The program offers the possibility of an exact energy calculation, where the k-value has been taken into
consideration.
14.3 Verification via METERTOOL
14.3.1 Equipment description
Verification equipment type 66-99-385 is used for testing and verifying the MULTICAL
®
401 calculator.
The test includes volume simultation and simultation of temperatures for the sensor inputs T1 - T2, which
together with volume simultation forms the basis of verification of the energy calculation.
The equipment is primarily designed for use in laboratories which test and verify energy meters, but it can also be
used to test meter operation.
The PC program METERTOOL type 66-99-702 is used for configuration, testing and verification.
All data communication beween the computer and the calculator is transmitted via the computer’s serial port,
COM1…8, which are connected to the verification equipment. Please note that the equipment must be supplied
via the associate mains adapter.
Verification does not include temperature sensors and flow part.
The verification equipment is supplied in below variants and is supplied complete with mains adapter, data cable
and calibration certificate.
During the verification the temperature sensors must be disconnected the terminals.
DELTA k-factor.exe