Venkon
Assembly, installation and operating instructions
23
General information on casings
Casings are factory-fitted as standard.
Casings for wall-mounted and ceiling-mounted models are installed and dismantled in the same way.
Always remove the casing ahead of maintenance work (apart from filter replacement).
Fig. 7: Dismantling the air inlet grille
1
Loosen the air inlet grille from
the magnet.
2
Unhook the air inlet grille.
Dismantling/installing the air inlet grille
With casings with air inlet grille, remove the grille from the
casing before installation and dismantling as the casing can-
not otherwise be removed or fitted!
Wire cables are fitted to the wire inlet grille on ceiling-moun-
ted units to prevent it from falling out and which are fixed to
the side panel of the casing with a carabiner hook.
1. Push the air intake grille to the side so that it comes out
of the support in the side panel and from the magnet.
2. Unhook the wire cables and remove the air inlet grille.
Fig. 8: Suspending the casing
Suspending the casing
Push the mounting brackets (left and right) on shoulder
screws so that the casing is hooked in place.
