Kampmann Airblock FG 06, Инструкция по установке и эксплуатации

Страница: 38 / 52

38
1.50 Airblock FG
Slimline air handling unit for decentralized, dynamic air treatment
Installation and Operating Instructions
Opening the service hatch (simplified diagram of a module)
Detail: Security hooks
Detailed view from below
10.5.3 Housing
The galvanised, double-walled housing
5
of the Airblock modules is
maintenance-free. Dirt on the outer housing has no influence on the
operation of the unit. Dirt on the inside of the housing indicates a lack of
maintenance.
Chiller modules are fitted with two service hatches
4
on the top and
underside.
10.5.4 Cu/Al Heat Exchanger
The heat exchanger
3
requires no maintenance if the system is properly
maintained, i.e. if the filter is monitored and changed regularly (see page
39). However, please proceed as follows if maintenance or repairs are
required:
• Carry out a visual inspection of the heat exchanger. To do this, open the
service hatch
4
.
• The heat exchanger can be removed through the side service hatch. To
do this, first remove the flow and return pipes
7
+
8
. Then loosen the
screws on the heat exchanger fastenings and pull out the heat exchanger
sideways.
Check the condensation tray
14
and droplet separator (if fitted) at regular
intervals and clean them if necessary.