Assembly
EN
13
Now the two lids will be attached to the grill.
For this you need the hinges, component
12
(4x needed), which you screw with the
screws
28
M5 x 10 (16x needed) at the back
of the grill. Then the two lids, components
17
and
18
, are also fixed to the hinge with
these screws so that the lids can be opened
and closed properly.
In addition, the chimney is screwed on the
outer right side of the barrel from the inside
with the screws
29
M6 (2x required).
Step 5
1
17
18
12
28
Step 6
Now the 3 handles, component
22
, are
attached to their intended positions. Please
use the screws
23
M6 x 65 (6x required)
and part
31
(6x) and fasten the handles as
shown in the illustration.
In addition, component
2
(2x provided) is
screwed to the front of the barrel grill. This
will later serve as a fixture for the shelf sur-
face. Please use the screws
27
M6 x 12
(2x required).
Das Thermometer, Bauteil
33
, wird an der dafür vorgesehenen Stelle an
dem Deckel des Grillfasses befestigt. Die
dafür benötigte Schraube ist bereits am Ther-
mometer vorhanden.
Next, screw together the open end of com-
ponent
14
with that of component 2 using
screws
27
M6 x 12 (2x required).
The grill racks, components
19
and
20
, can
now be placed in the barrel grill.
Next, attach the shelf surface, component
3
, to the horizontal support struts, com-
ponent
2
, using screws
26
M6 x 25 (6 x
required).
Finally, components
4
and
9
are hooked
into component
11
under the grill.
Now the smoker barrel grill is ready and can
be used.
Step 8
4
9
Step 7
3
2
19
20
27
26
22
2
33
23
31
27
132736_Kamino_BBQ_Anleitung_A4_DE_EN_FR_IT_ES_35S.indd 13
05.12.19 12:26
