84
the trigger is activated halfway, the blade moves progressively halfway through its opening.
14.2
Opening change
The KV380 machine incorporates a memory blade opening change system.
This means that we can always adjust the opening of the blade according to the appropriate
cutting diameter.
The opening of the blades can be adjusted in two positions:
• 100% blade opening (default start opening).
• 50% blade opening approximately.
Procedure to adjust the opening of the blades:
• Press the on/off button. After the beep, press the trigger twice within one second to
open
the blade - 100% blade opening.
• Press the power button once. After the beep, pull the trigger all the way down and you will
hear another beep indicating that you have changed the aperture to 50%.
• Press the power button. After a beep, pull the tri
gger all the way and the blade opening will
return to 100%.
15. Maintenance and cleaning
Tools to be repaired must be sent to Customer Assistance Service. Use original part keeps the
tool good condition and safe.
Disconnect the battery from the tool before checking, maintaining and repairing the pruning
shear, to avoid risk of unexpected activation of the tool.
Warning!
In specific situations of very hard use, the blade and the handle could reach high temperatures. It is
recommended to handle the pruner with care, using protective gloves.
Please wear glove before you check the blade is sharp or not, that isto avoid blade hurt you.
Check the pruning shear frequently, this will keep tool safe and reliable.
• Frequent checking of the tool will make it safe and reliable.
• Do not spray the tool or immerse it in water, it m
ay cause a short circuit inside the tool.
• Keep the tool clean and free of any element that hinders the proper ventilation of the motor, use a
damp cloth to clean the tool. Do not use detergents or solvents to clean the tool.
• Clean the blade after each
use, protect it with suitable oil or grease.
