83
•
Keep all other people at a minimum distance of 1.5m
•
Blade will be hurt or jammed if cutting bigger branch
forcedly.
•
Do not move the tool during the pruning shear cutting, it can cause danger.
•
Do not use the device in rain or humidity environment.
•
If the pruners stop working during long term use and you hear 4 fast beeps, this is an indication of
undervoltage protection which means the battery is depleted. Please charge as soon as possible.
•
Switch off the device after use and remove the battery from the pruner.
•
If no operation for 10 minutes, the pruner switches off automatically.
Caution: please check battery charge level or blade sharpening when cutting is difficult
or not smooth.
14.1
Cutting control mode
The KV380 electric pruning shears has two cutting control modes:
Progressive cutting control.
Non-progressive cutting control
PROGRESSIVE CUT MODE
The machine starts by default in progressive cut mode, this means that the blade moves according to the
depth of the trigger actuation, that is, the blade moves progressively proportional to the trigger
movement.
NON-PROGRESSIVE OR IMPULSE CUTTING.
To change the cutting control mode, you must close the blade and hold the trigger for 2 seconds, until
you hear a sound indicating that it has changed to pulse mode, then you must press the trigger again 2
times in one second of time . In pulse mode the blade moves in one stroke when the trigger is pressed.
In the progressive cutting control, the blade moves according to the depth of the trigger drive, that is, if
