79
proportional to the number of batteries connected and the state of their charge. Monitor the charging
time through the LED indicator (red light charging, green light charge complete).
• Disconnect the battery charger connectors from the batteries when charging is complete.
• Make sure the battery is recharged at least every 3 months during storage periods. Do not sto
re the
machine with the battery connected
11
Working environment
•
Keep temperature of environment at 10°C ~ 22°C when charging battery, 0°C ~ +45°C when battery
is working.
•
Keep tool at temperature of 0°C ~ +60°C when working
•
Do not use in explosive atmosphere or near flammable substances or gases.
•
Do not use in case of rain or on wet branches
12
Initial assembly
Check that the pruning shears and batteries are clean and dry, then insert the battery into the
appropriate housing according to the following image.
13
Operations start procedure
Please wear suitable cloth and glove when operate this tool. Always check tools before use,
make sure on/off switch and safe switch are all ok. The power should be put off when you
loosen the trigger. Stop using the tool in case of switch failure. Always check rated voltage
of battery match pruning shear.
Switch off the machine, blade will stop in many second, must sure blade stop fully before
touching it, otherwise blade will hurt your body.
•
Press the power switch. After warning tone, please pull the trigger three times without holding. Do