Kambrook KI735, Инструкция пользователя

Страница: 9 / 16

8
Before First Use
Remove any promotional material
from the iron. Remove any sticker or
protective cover from the soleplate.
When operating the iron for the first time,
iron on an old piece of fabric to ensure
that the soleplate and water tank are
completely clean.
When the iron is used for the first time,
some vapour may emit. After a short
while however, this will cease. The
vapour is due to the initial heating of
the materials used in the iron. It is safe
and will not harm the performance of
the iron.
CAutIon:
Never iron
without water in the water
tank. Water needs to be in
the water tank even when
ironing without steam.
notE:
As an important part of our
quality control process, your iron has
been individually tested. As a result,
you may notice a small amount of
condensation or water droplets on
the inside of the water tank. There is
no need for concern.
operating Your Kambrook Iron
NOTE:
on label means: “This article cannot be ironed”
[e.g. chlorofibre, acrylic, elastodiene]
Label Code Kind of Textile Temperature
Control
Variable Steam
Control
[see garment
instruction]
[advised position]
synthetic
modacry
polypropylene
polyurethane
acetate
triacetate
matalized
cupro
plyamide [nylon]
polyester
modal
viscose [rayon]
silk
MIN STEAM
wool
MAX STEAM
cotton
linen
table A
MIN
LINEN
MAX