14
Care, Cleaning and Storage
Cleaning After Use
1. Always ensure that the Speed
Control Switch is in the ‘OFF’
position and that the power is
switched off at the power outlet,
then remove the power cord from
the power outlet.
2. Press the ‘EJECT’ button and
remove the beaters/dough hooks
from the mixer.
3. Wipe the mixer body with a soft,
damp cloth then dry thoroughly.
4. Wipe any excess food particles
from the power cord.
5. Wash the beaters, dough hooks,
storage case in warm soapy
water with a soft clean cloth.
Rinse and dry thoroughly.
6. Do not allow the beaters/dough
hooks to soak in water for an
extended period of time, as this
may damage the metal finish.
NOTE:
Do not place any part
of the hand mixer inside the
dishwasher.
NOTE:
Do not use abrasive
scouring pads or cleaners
when cleaning the beaters/
dough hooks as these may
scratch the surface.
NOTE:
Do not wash or soak
the mixer body in water or any
other liquid. Clean with a damp
cloth and dry thoroughly. Do
not allow water or any other
liquid to enter the gear system
as damage may result.
NOTE:
Ensure that the beaters/
dough hooks are not soaked in
water for an extended period
of time, i.e. for several hours
overnight, as this may damage
the metal finish.
WARNING:
Never
immerse the hand mixer,
power cord, or plug in
water or any other liquid.
Storage
Before storage, turn the power off at
the power outlet and then remove
the power plug from the outlet.
Ensure the hand mixer is cleaned and
completely dry.
Storage Case
The beaters and dough hooks
conveniently pack inside the storage
case.
1. Put the storage case on a flat
surface and place the beaters
and dough hooks inside the
storage case. Position the beaters
so they are in opposite directions
from each other (See Fig. 3).
Do the same for the dough hooks
and also position the dough hook
shafts at the same end as the
beaters (See Fig. 4). Make sure to
lay the accessories flat.
Fig. 3
Содержание KHM300 Series
Страница 2: ...Suits all KHM300 models INSTRUCTION BOOKLET...
Страница 24: ...23 Notes...